|
控制器 Controller
AMS XL200 系列数控系统——高精度，高效率
基本特点如下：
- 结构紧凑，将CNC、PLC、人机界面和通讯等功能集于一体。可靠性高、免维护、易于安装。
- 两个编码器接口。
- 两个模拟量接口。
- 一个SERCOS数字伺服器驱动器接口，连接并驱动数字式伺服驱动器
- 一个R232串口，连接条形码读码器（同时可用于系统的升级与维护）。
- 一个显示器接口，可连接工业标准SVGA显示器。
- 一个鼠标的接口，可连接工业标准PS/2鼠标，使操作更容易。
- 10.4" 超大液晶彩色触摸屏
- 10个DIP开关。通过DIP开关状态的不同设置实现许多不同类型的控制功能，如飞剪或停剪。
- 内置PLC，24个输入点，24个输出点，控制程序出厂已烧制好。
For high accuracy and high efficiency, AMS XL200 SERIES CONTROLLER features include:
- Compact structure, integrating the CNC, PLC and human-machine interface into one assembly that is reliable, maintenance-free, and easy to install
- Two encoder inputs.
- Two analog outputs.
- One SERCOS interface for connecting digital servodrives.
- One RS232 serial port for connecting an AMS-approved bar code scanner (this port is also used for updating the controller's firmware).
- One SVGA Port for connecting to an industry-standard SVGA monitor.
- One mouse port for connecting to an industry-standad PS/2 mouse to make operation even easier.
- A large 10.4 inch, color liquid crystal display (LCD) with touch-screen.
- 10 DIP switches for defining different controller types and functionality, such as flying shear of feed-to-stop shear.
- A built-in, pre-programmed machine control with 24 Inputs and 24 Outputs.
CNC功能 CNC Function
控制辊压成型机
- 手动或自动控制板料的前后运动。
- 手动或自动控制切刀或冲模的动作。
- 精确控制生产线速度。
- 控制多达12个冲模（含前切断及后切断）的动作。
- 可配置分辨率高达8000P/R的编码器。
- 可高达300米/分钟速度的开环控制。
- 可设置为停剪模式，也可设置为高效率飞剪模式。
- SERCOS数字接口可连接多达八个伺服控制器。采用光电缆通信，消除了传统通信因电缆长度或电噪引起的干扰问题。
- 模具（如引头）可以多轴控制配置（如Y轴控制）。
- 具有多冲头冲模控制功能，可控制多达75个分冲头，实现任意一分冲头的单动，或任意若干分冲头的组合动作或群动。
- 通过参数设置，AMS系统可以对切断刀具与冲压模具因为机械与电气的原因造成的延迟进行持续的跟踪并做持续的自动补偿，从而提高了控制精度。
- 可以根据用户要求设定工件长度允差参数。
- 内置闭环控制模拟软件包，通过图形显示可以便捷地进行调整。
- 内置PLC系统，24个输入点，24个输出点，各种控制程序出厂时已烧制无须用户编程，简化了制造厂设计过程，缩短了设计周期。并且提供非常明了的I/O诊断画面。
- AMS系统可连接工件标签打印机，打包标签打印机，条形码读码器。
- 选配软件ECLIPSE有ERP软件接口，通过ECLIPSE可实现办公室PC与车间AMS数控系统数据通信，发送订单及程序，并实时监控生产线的工作状态。
The XL200controls the roll-forming machine.
- Manual or automatic control of line movement forward or backward.
- Manual or automatic control of tooling movement.
- Accurate control of line feed.
- Control of up to 12 individual presses.
- High resolution encoder with 8000 pulses per revolution can be used.
- Line speed of up to 1000FPM(open-loop controller).
- Stopping and Flying modes.
- SERCOS digital interface for connecting with as many as eight servo drivers and communicating with them by optical figer to eliminate signal problems caused by the cable length and signal noise.
- Multi-axis configuration for punch or press or die.
- Control for up 75 gags , so the system can activate any gag or any combination of press gags.
- Delay reaction parameters for of the shear or punch or press or compensate for press reaction times and stop reaction times and increase accuracy.
- Customer-specified length tolerance parameter.
- Closed loop motor and flying press simulation for easy calibration.
- A built-in,pre-programmed machine control with 24 inputs and 24 outputs.
- Easy controller calibration through setup parameter.
- Communication ports to connect with part printers ,bundle labelers, and bar code scanners.
- Optional ECLIPSE software for ERP interface . ECLPSE can be installed on an office PC, and communicate with AMS controller on the production floor, sending the orders and monitoring the machines.
操作与显示 Operation and display
- 自动运行模式下，LCD实时显示各种必要信息：加工的批次，加工数量，已加工量，当前工件位置等，并且可以后台编程，可以一边加工一边编程。
- 公英制可以选择切换
- In the auto mode the LCD displays
-- Bundle number
-- Total quantity of workpieces for the order
-- Quantity of workpieces made
-- Quantity of workpieces needed to be made
-- Current position of the sheet
You can program a order as the line is in run.
- Displays in Inches or metric
- 多种语言可选择安装：英语，西班牙语，意大利语，俄罗斯语，德语，法语（加拿大），波兰语等。
Language options such as English, Spanish, French, Italian, Russian, polish, and German.
零件编程 Part Programming
- 冲孔成型等编程，直接根据图纸尺寸，没必要计算或考虑过程。
- 可以用相对于工件前端，尾端或中心线的距离描述孔的位置进行编程。
- 对多个等距孔有非常简便的编程方式。
- 标准宏程序编程。
- Program punch patterns from dimensional drawings – no need to calculate progressions.
- Punch operation programming referenced according to the leading edge of the part, trailing edge of the part, or the center of the part.
- Easy method for programming multiple repeated holes.
- Standard Macro Programming.
- 内置PC键盘界面，带有14功能键和25个文本编辑键
Built in virtual PC keyboard with 14function keys and 25test edit keys.
- 在线帮助，帮助你理解当前参数的含义。
On line help for instant reference on all parameters.
- I/O诊断画面，清晰的显示各个输入输出状态，方便维护工作。
I/O diagnosis view for easy system maintenance work.
|
